Fast Dry UV-LED lash adhesive | 0.3 seconds | 5 ml

Fast, faster, Fast Dry!

Our proven Fast Dry UV-LED lash adhesive impresses with ultrafast curing, a clear adhesive bond, and maximum control during eyelash extensions.

Thanks to its clear formula, Fast Dry is ideally suited to our UV/LED lamp systems, and particularly to our optimized LED White Light systems.

Ultrafast curing under UV and LED White Light

Fast Dry was developed for especially fast and controlled curing with suitable UV/LED lamp systems.

Under optimal conditions, the adhesive cures in approx. 0.3 seconds with a new, high-performance J&B Lashes UV lamp. This gives you an especially fast adhesive bond and lets you carry out your eyelash treatments efficiently and precisely.

Fast Dry also impresses with especially rapid curing under our optimized LED White Light systems. Curing under LED White Light may take a little longer than with a UV lamp. Thanks to its clear formula, however, Fast Dry is ideally suited to both lighting systems.

Targeted curing is activated by light and is therefore largely independent of air humidity.

The clear adhesive bond remains virtually invisible and blends seamlessly into a wide range of eyelash extensions. Especially on brown or lighter natural lashes, there are no noticeable black adhesive dots.

Fast Dry - maximum speed meets controlled application

Would you like to work especially quickly without being under time pressure while precisely positioning extensions?

Then our Fast Dry is the ideal choice.

Unlike traditional lash adhesives that cure depending on air humidity, Fast Dry gives you more control when positioning extensions. The especially fast, targeted curing then takes place with a suitable UV/LED lamp.

You can therefore take your time picking up the extension, dipping it, positioning it on the natural lash, and aligning it precisely.

Only once the extension is perfectly placed do you cure the adhesive bond in the shortest possible time.

This allows you to work in a controlled way without the constant time pressure of a fast-drying, air-curing lash adhesive.

Clear adhesive bond for natural lash looks

A particular advantage of Fast Dry is its clear formula with no black pigments.

This creates virtually invisible adhesive bonds that blend seamlessly into the eyelash extensions.

This is a key visual advantage, especially for clients with lighter or brown natural lashes and for natural lash looks.

Fast Dry is ideal for:

• classic eyelash extensions

• Natural and subtle lash looks

• Brown lashes

• Clients with lighter natural lashes

• Individual lash technique

• Volume and mega-volume sets

• Premade lash fans

Can withstand stress immediately once fully cured

Once fully cured under the UV/LED lamp, the bond can withstand stress immediately.

Your clients do not need to avoid water or high humidity for hours after treatment. Once fully cured, the bond is water-resistant, offering a significant advantage over conventional air-curing lash adhesives.

You are also much less dependent on humidity while working than with conventional lash adhesives.

Only extreme room temperatures should be avoided. For optimal application, we recommend keeping the room temperature below approximately 26 °C.

Low fume emissions - a major benefit for sensitive clients

A particular advantage of our Fast Dry UV LED lash adhesive is its targeted, exceptionally fast curing under UV/LED light.

Unlike conventional lash adhesives that cure depending on humidity, the bond cures in a very short time under the lamp. This can significantly reduce the time during which fumes from the still-liquid adhesive are released.

This is especially interesting for clients who have previously been sensitive to the fumes or the treatment when using conventional lash adhesives.

Our many years of experience and feedback from salon practice show that numerous clients who previously could not tolerate classic lash adhesives have been able to wear lash extensions again with our UV/LED system.

This makes Fast Dry an interesting alternative for clients who have experienced sensitivity issues with conventional lash adhesives.

Important: Our UV LED lash adhesive also contains ethyl cyanoacrylate. Allergic reactions therefore cannot be ruled out. If an adhesive allergy is known or suspected, consult a dermatologist to assess compatibility before having another treatment.

In brief

• For professional and commercial use only

• Contents: 5 ml

• Color: transparent

• Cures in approximately 0.3 seconds under optimal conditions

• Compatible light systems: 395 nm UV/UV LED or optimized 405 nm LED White Light

• Especially well-suited to our LED White Light systems

• Suitable for advanced lash stylists and professionals

• Oil- & water-resistant

• Humidity: hardly relevant for curing

• Room temperature: hardly relevant - for optimal performance, room temperature should not exceed 26 °C

• Very low fume emissions

• Viscosity: medium

• Extensions last until the natural lash falls out

• Unopened: shelf life of 6 months

• Shelf life after opening: 3 months

• Avoid contact with light, daylight, and UV light

• Suitable for classic lashes, volume techniques, and premade fans

• Grown-out extensions can be removed as usual with tweezers

• Can be completely removed with a regular eyelash extension adhesive remover

• Recommended adhesive surfaces: adhesive rings

• Do not use reflective adhesive surfaces

• Use a fresh drop of adhesive about every 30 minutes

Curing time and lamp compatibility

The stated curing time of approx. 0.3 seconds is a reference value measured under optimal laboratory conditions using a new UV lamp.

In daily studio use, the actual curing time may vary. Factors include the light intensity at the bonding point, the age of the light module, the distance between the lamp and the bonding point, and the light system used.

Transparent Fast Dry is especially well suited to our optimized LED white-light systems and also cures exceptionally quickly under this light system. However, the exposure time required may be slightly longer than with a suitable UV lamp.

Our UV/LED adhesives are optimally matched to J&B Lashes lamp systems. Since lamps from other manufacturers may differ in light spectrum, actual light intensity, and technical properties, identical curing times or general compatibility with third-party devices cannot be guaranteed.

For optimal results, we therefore recommend using it with a compatible J&B Lashes UV/LED lamp. If using other lamp systems, check compatibility before use and always ensure the adhesive is fully cured.

Ingredients

• Ethyl Cyanoacrylate

• Poly (Methyl Methacrylate)

• Photoinitiator

Fast Dry technology for virtually invisible bonds

With Fast Dry UV-LED eyelash extension adhesive, you get an especially versatile adhesive that combines ultra-fast curing with a transparent, virtually invisible bond.

Whether you're applying classic black lash extensions, creating natural lash looks, or applying brown lash extensions, the transparent Fast Dry allows precise placement, controlled work, and especially fast curing.

Its excellent compatibility with our UV/LED and optimized LED white-light systems makes it an ideal companion for professional lash artists who value speed, flexibility, and natural-looking results.

Combined with a compatible J&B Lashes UV/LED lamp, it creates a professional system for fast, controlled, and efficient work.

Do you have questions about Fast Dry UV-LED eyelash extension adhesive? Our customer service team will be happy to help with any questions.