Fast Dry Brown UV-LED lash adhesive - ultra-fast, reliable & naturally brown

Fast, faster, Fast Dry!

Our popular Fast Dry UV-LED lash adhesive is now also available in brown - perfect for lash artists who want to create an especially harmonious overall look with brown extensions and natural lash looks.

Ultra-fast curing with modern UV/LED technology

Fast Dry Brown was developed for exceptionally fast, controlled curing with suitable UV/LED lamp systems.

Under optimal conditions, the adhesive cures in approximately 0.3 seconds with a new, high-performance J&B Lashes UV lamp. This gives you an exceptionally fast adhesive bond, helping you carry out lash treatments efficiently and precisely.

It can also be used with suitable LED white-light systems. Depending on the light system, however, curing under LED white light may take a little longer than under a UV lamp.

Curing is activated by light, making it largely independent of humidity.

The adhesive’s brown color blends especially harmoniously with brown lash extensions and natural lash sets. Instead of a clearly visible black adhesive dot, it creates a softer bond between the natural lash and extension - ideal for clients who want a particularly natural look with less contrast.

Fast Dry Brown - for natural lash looks without compromise

The Fast Dry Brown UV-LED lash adhesive combines the proven qualities of our Fast Dry with a natural brown color.

Unlike traditional lash adhesives that cure depending on humidity, Fast Dry Brown gives you more control when positioning extensions. The particularly fast, targeted curing takes place afterward using a suitable UV/LED lamp.

You can therefore take your time picking up the extension, dipping it, positioning it on the natural lash, and aligning it precisely.

Only once the extension is perfectly positioned do you cure the adhesive bond in the shortest possible time.

This enables controlled work without the constant time pressure of a fast-drying, air-curing lash adhesive.

The brown adhesive color creates a particularly harmonious result, especially with Brown Lashes, soft lash looks and clients with lighter or brown natural lashes.

Ready to withstand stress immediately after curing

Once fully cured by the UV/LED lamp, the bond can withstand stress immediately.

Your clients don't have to avoid water or high humidity for hours after treatment. Rainy days, showers and even a subsequent sauna visit are no problem once the adhesive has fully cured.

You are also much less dependent on humidity while working than with conventional air-drying lash adhesives.

Only extreme room temperatures should be avoided. For optimal application, we recommend keeping the room temperature below approx. 26 °C.

Why Fast Dry Brown?

The brown color opens up entirely new possibilities for modern lash styles.

Black adhesive dots can create an unnecessarily strong contrast, especially with brown extensions. Fast Dry Brown, on the other hand, creates a softer transition between the natural lash, adhesive bond and extension.

The result: natural, elegant and harmonious.

Perfect for:

• Brown Lashes

• natural-looking lash extensions

• Soft & Natural Looks

• clients with brown or lighter natural lashes

• classic lash technique

• volume techniques

• pre-made fans

In short

• For professional and commercial use only

• Color: Brown

• Cures in approx. 0.3 seconds under optimal conditions

• Compatible light systems: 395 nm UV/UV-LED or optimized 405 nm LED White Light

• Suitable for advanced lash stylists and professionals

• Oil- & water-resistant

• Humidity: barely relevant for curing

• Room temperature: barely relevant - for optimal performance, room temperature should not exceed 26 °C

• Very low fumes

• Viscosity: medium

• Extension retention: possible until the natural lash sheds naturally

• Shelf life unopened: 6 months

• Shelf life after opening: 3 months

• Avoid contact with light, daylight and UV light

• Suitable for classic lashes, volume techniques and pre-made fans

• Grown-out extensions can be removed as usual with tweezers

• Complete removal with a regular lash adhesive remover

• Do not use reflective adhesive pads

• Use a fresh drop of adhesive approximately every 30 minutes

Curing time and lamp compatibility

The stated curing time of approx. 0.3 seconds is a reference value determined under optimal laboratory conditions using a new UV lamp.

In daily salon use, actual curing time may vary. Factors that can affect it include the light intensity at the bond, the age of the light module, the distance between the lamp and the bond, and the light system used.

Our UV/LED adhesives are optimally matched to J&B Lashes lamp systems. Since lamps from other manufacturers may differ in light spectrum, actual light intensity, and technical characteristics, identical curing times or general compatibility with third-party devices cannot be guaranteed.

For optimal results, we therefore recommend using it with a suitable J&B Lashes UV/LED lamp. When using other lamp systems, check compatibility before use and always ensure that the adhesive has fully cured.

Ingredients

• Ethyl Cyanoacrylate

• Poly (Methyl Methacrylate)

• Photoinitiator

• Color pigments

The perfect addition to brown lashes

Brown lash extensions deliver especially soft, natural results. With UV-LED Fast Dry Brown Lash Adhesive, you can carry this look through to the adhesive bond.

The brown adhesive blends harmoniously into the lash set, while you also benefit from the fast, controlled curing of our Fast-Dry system.

Precise placement, fast curing, and a natural brown bond make it the ideal companion for professional lash artists who want no compromises when creating their brown lash sets.

Used with a suitable J&B Lashes UV/LED lamp, it provides a professional system for working quickly, precisely, and comfortably.

Do you have questions about UV-LED Fast Dry Brown Lash Adhesive? Our customer service team will be happy to answer any questions you may have.