UV-LED eyelash adhesive Fast Dry Black – ultrafast & jet black

Fast, faster, Fast Dry!

Our tried-and-tested UV-LED eyelash adhesive Fast Dry is now also available in black. Fast Dry Black combines the fast, controlled curing of our UV/LED system with the classic black adhesive bond preferred by many professional lash stylists.

Ultrafast curing with modern UV/LED technology

Fast Dry Black was developed for particularly fast and controlled curing with suitable UV/LED lamp systems.

Under optimal conditions, the adhesive cures in approximately 0.3 seconds with a new, high-performance J&B Lashes UV lamp. This gives you an especially fast adhesive bond, so you can perform your lash treatments efficiently and precisely.

It can also be used with suitable LED white-light systems. However, due to the black pigmentation, curing under LED white light may take slightly longer than under a UV lamp.

Curing is activated precisely by light and is therefore largely independent of humidity.

The black pigmentation blends perfectly with classic black eyelash extensions, creating a dark, defined, and visually intense lash line.

Fast Dry Black – classic black look meets UV/LED technology

Do you love the look of black eyelash adhesive but don't want to miss out on the benefits of a modern UV/LED adhesive?

Then Fast Dry Black is the perfect combination.

Unlike traditional eyelash adhesives that cure depending on humidity, Fast Dry Black gives you more control when positioning extensions. It then cures quickly and precisely with a suitable UV/LED lamp.

You can therefore take your time picking up the extension, dipping it, positioning it on the natural lash, and aligning it precisely.

Only when the extension is perfectly in place do you cure the adhesive bond in the shortest possible time.

This allows for controlled application without the constant time pressure of a fast-drying, air-curing lash adhesive.

Black adhesive bond for intense lash looks

The black pigmentation of Fast Dry Black blends perfectly with black lash extensions.

Especially for dark, dramatic lash sets, the black adhesive bond helps create a uniform overall look and can further intensify the lash line visually.

This makes Fast Dry Black ideal for:

• Classic black lash extensions
• Intense lash looks
• Volume and mega-volume sets
• Individual lash technique
• Premade lash fans
• Clients who want a dark, defined lash line

Ready to withstand stress immediately after fully curing

Once fully cured by the UV/LED lamp, the bond can withstand stress immediately.

After treatment, your clients don't have to avoid water or high humidity for hours. Rainy days, showers, or even a sauna visit afterward are no problem once the adhesive has fully cured.

Even while you work, you are much less dependent on humidity than with conventional air-curing lash adhesives.

Only extreme room temperatures should be avoided. For optimal application, we recommend keeping the room temperature below approx. 26 °C.

In brief

• For professional and commercial use only
• Color: Black
• Cures in approx. 0.3 seconds under optimal conditions
• Required UV wavelength: 395 nm UV/UV LED or optimized 405 nm LED white light
• Suitable for advanced lash stylists and professionals
• Oil- & water-resistant
• Humidity: hardly relevant for curing
• Room temperature: hardly relevant - for optimal performance, the room temperature should not exceed 26 °C
• Very low fumes
• Viscosity: thin
• Extension retention: may last until the natural lash falls out
• Shelf life unopened: 6 months
• Shelf life after opening: 3 months
• Avoid contact with light, daylight, and UV light
• Suitable for individual lashes, volume techniques, and premade lash fans
• Grown-out extensions can be removed with tweezers as usual
• Complete removal with a standard lash adhesive remover
• Do not use reflective adhesive pads
• Use a fresh drop of adhesive approximately every 30 minutes

Curing time and lamp compatibility

The stated curing time of approx. 0.3 seconds is a reference value measured under optimal laboratory conditions using a new UV lamp.

In daily salon use, the actual curing time may vary. Factors that can affect it include the light output, the age of the light module, the distance between the lamp and the bonding point, and the light system used.

Our UV/LED adhesives are optimized for J&B Lashes lamp systems. Since lamps from other manufacturers may differ in light spectrum, actual light intensity, and technical characteristics, identical curing times or general compatibility with third-party devices cannot be guaranteed.

For optimal results, we therefore recommend using it with a suitable J&B Lashes UV/LED lamp. If using other lamp systems, check compatibility before use and always ensure complete curing.

Ingredients

• Ethyl Cyanoacrylate
• Poly (Methyl Methacrylate)
• Photoinitiator
• Black color pigments

Fast Dry technology with a classic black look

With UV-LED Lash Adhesive Fast Dry Black, you get the benefits of controlled UV/LED curing combined with the classic black look of professional lash adhesives.

Precise placement, fast curing, and an intensely black bond make it the ideal choice for professional lash artists who refuse to compromise on their black lash sets.

Used with a suitable J&B Lashes UV/LED lamp, it creates a professional system for working quickly, precisely, and efficiently.

Do you have questions about UV-LED Lash Adhesive Fast Dry Black? Our customer service team will be happy to answer any questions you may have.